Chapter 126
Use a dense knife machine to sift again and cut into wood chips.
At least two modern machines are needed. Otherwise, it would take at least several days of human resources to turn the wood into scraps.
For Tang Zheng, this step is very convenient.
Throw all the wood into the synthetic Taichung.
Input sawdust
As long as there is no difference in qualitative change, the synthesis stage can be completed.
This is also the core key for Tang Zheng to open up the gap with other players.
Different from other levels of innate talent.
As the only Level 1 SSSinnate talent, as long as you own it, others will no longer have even similar innate talents. This is the particularity of SSS-Rank innate talent.
The synthesis table can save most of the time.
Ding!
After the microwave sounded, Tang Zheng clicked to confirm, and the synthesis table was like shaking beans, spitting out the polished sawdust all at Tang Zheng. In the big tank prepared in advance.
Each piece of sawdust is about the thickness of two fingers.
Second Step, move the cauldron to the bonfire made of stones.
After adding water, bring it to a boil.
The purpose of this step is to soften the wood.
Cooking on a high fire all morning, constantly staring at the sawdust, and occasionally taking a hard and thick wooden stick to stir.
When the water is boiled dry, add water to it.
After a morning of cooking, even a hard bone is stewed.
Take out the wood while it is hot, and this step Tang Zheng handed it over to Murphy.
What is a ruthless iron hand, huh?
While the removed wood is softened, it is laid flat on a smooth stone surface and repeatedly beaten with a stick.
The wood, which was originally broken into sawdust, was boiled in a high fire and then hit by a stick. After being hit for a while, you could see strands of pale-yellow fibers being smashed apart.
Keep beating until all the sawdust turns into strands of yellow threads.
Collect all the fine threads, tie them in bundles with vine rope, and tie them into bundles.
Exposed in the sun at noon.
At this time, the wood fiber has been beaten into a brush like a shabu-shabu.
Under the stick, not only the filial son, but also the fiber.
After two hours of drying, untie the vine rope, spread the dried wood fiber, and cover it with a large copper plate.
Tang Zheng walked to the lake in three or two steps with the large copper plate, and immersed the entire large copper plate in the water.
After several days of sunlight evaporation and the decomposition of microorganisms in the water, the blood in the lake has long since disappeared and replaced by a clear lake.
Let the water cover the large copper plate, and fully absorb the water again by the wood fiber, and wait until it softens.
At this time, the wood fiber has been as thin as cicada wing.
In the process, the little catfish also came to join in the fun.
It already has two palm-sizes, and its tail sways like a small motor, and it can fly ten meters away in a swipe of smoke.
Ignoring the naughty little catfish, Tang Zheng started to brush.
At this time, the wood fibers are strands and strands. To unite and solidify them, some cementing materials are needed.
this step, also called into the pulp.
The only gelling material Tang Zheng can choose from is lime water.
I clicked on the light curtain and asked some of my employees.
Someone actually dug limestone.
Good grade minerals.
Throw it into the furnace and heat it to melt at ultra-high temperature to obtain viscous lime.
After adding a certain proportion of clean water, the diluted lime water is obtained.
A brush made of vines, dipped in lime water, and brushed a layer on the softened wood fiber.
Put another layer of wood fiber and pile it on top.
Continue to brush.
Just stack the Arhat style until the wood fiber raw materials in hand are all used up.
Tang Zheng got a large square-shaped cube of wood fiber.
At this point, you can already see the embryonic form of the paper.
If you are impatient, cut and cut now to get rough cardboard.
But now that you have done it, try to do it well once and for all.
Tang Zheng doesn't want his delicate Aju to be ravaged by rough and frosted paper, and even some of the paper has some wood thorns on it.
If you don't pay attention, the wood thorn plunges directly into the meat
That feels too hot and wet!
Find a big stone and directly press it on a whole piece of wooden paper, and squeeze the voids in it to make the material more compact, so that it will not be broken after being cut. .
Press it for half an hour, then add water again to soften it.
This step is called desizing.
Wash the excess lime water so that the remaining lime water penetrates into each gap of the wood fiber to enhance the tightness of the paper.
The last step is to dry it over the campfire.