Chapter 75 Deep Instructions

Chapter 75 Deep Instructions

Chapter 75 Deep Instructions (Please Order)
With the full cooperation of the town government and village committees, the number of contracted breeders of Hailufeng Company in the local area has skyrocketed.

In just less than five days, the 400 acres of fish ponds allocated to the assistance program were completed by the six administrative villages under Magong Town.

A total of 316 poor households signed quantitative breeding contracts, and the town government also allocated 150 million yuan in special funds to help some poor households who did not have fish ponds to dig fish ponds.

Some poor households with fish ponds have already started preparing for aquaculture, ordering Egyptian catfish fry and contacting relatives and friends to ask for their leftovers.

This trend also affected ordinary villagers, and soon the remaining 200 acres of fish ponds were snapped up by surrounding villagers.

Taking into account the stable supply of raw materials, Jiang Miao and his brother-in-law and others discussed and approved an increase of the quota of 500 acres of fish ponds.

This attracted all the local breeders who were interested in signing the contract.

And the other side.

The second-hand feed production line purchased from Mr. Du in Yangjiang was also transported back to Magong Town by more than a dozen large trucks.

Boss Du was a fairly honest man, and he introduced the supplier of the production line equipment that he had previously ordered to the personnel at Hailufeng Company who were going to receive the equipment. He also transferred the subsequent maintenance and repair contract that he had signed with the other party to Hailufeng Company.

Considering the problem of equipment installation, Jiang Miao did not look for other equipment companies to install it. Instead, he asked the equipment supplier to send people to install it. At the same time, he asked the other party to conduct a comprehensive inspection and maintenance of the equipment as soon as possible.

However, Jiang Miao does not need to follow up on these matters all the time. He just needs to sign his name. The people who really follow up must be the employees below.

Similarly, at the company's Environmental Protection Office, Lu Mingyuan and others have completed their inspection of the gold and silver processing plant in Meilong Town and brought back a preliminary environmental improvement plan.

Inside the office.

Jiang Miao poured Lu Mingyuan a glass of Phoenix Dancong.

"Boss, this is my environmental protection transformation plan." Lu Mingyuan handed over the plan first, then picked up the teacup and took a sip.

Jiang Miao took the document and looked through it for a while.

The environmental protection renovation plan of the gold and silver processing plant mainly focuses on noise isolation, air powder sedimentation, gold and silver powder recovery, and sewage recycling. The overall cost of equipment and construction renovation will be around 60 yuan.

He took out a ballpoint pen and signed it, approving the plan.

"Mingyuan, it's just right that you're back. I'll give you my new task."

Lu Mingyuan put down his teacup: "Boss, please give me your orders."

"Some of the production equipment of the feed factory has been returned, and the site of the feed factory is also being repaired. You should plan the environmental protection project of the feed factory as soon as possible before the factory goes into production."

Lu Mingyuan would not procrastinate on such a matter. "No problem. I will bring people to the feed factory tomorrow."

Then, Jiang Miao explained some subsequent work and asked Lu Mingyuan to continue to follow up on the progress of the environmental protection project of the gold and silver processing plant. At the same time, he began to arrange inspections of feed factories, canning factories, laboratories, and farms to plan and design supporting environmental protection projects for these factories and places.

...

After taking care of the arrangements for the environmental protection project, Jiang Miao handed over other matters to Deputy General Manager Jiang Haibo, and focused his energy on the experimental work.

As for the things happening in the experimental area, although there have been many changes within Anjiade Company, the stock price of the company has been volatile in the Hong Kong stock market for several days, during which time there have been several verbal and physical fights.

However, these things have little to do with Hailufeng Company, because the other party has completed the rectification of the problems on time, including replacing those second-hand instruments.

Since the other party had already rectified the relevant issues, Jiang Miao signed the project acceptance certificate readily after confirming that there were no problems.

In the past few days, he has been taking Shuya, Zhang Chengdong and others to familiarize themselves with the experimental instruments, especially the most important genetically modified instruments.

Because the application of genetic modification technology is an important direction for the company's future, he and Shuya and others must familiarize themselves with it as soon as possible.

Fortunately, there is an identification panel. Although the identification panel cannot deduce unknown technologies, all conditions of existing items will be displayed in great detail on the identification panel.

This allowed him to become familiar with these devices and operate them easily. After all, the identification panel had already displayed all the information about the instruments. If he still couldn't learn this, then he would be truly hopeless.

In front of a computer supporting a genetically modified device, Jiang Miao's eyes were somewhat solemn.

Because the problem with this computer is very serious.

It’s not that Anjiade Company gave us fake products, nor was there any equipment failure.

The computer in front of you is imported from all over, including the software, and the equipment is in very good operating condition.

What really made him uneasy were some hidden problems deep within the equipment.

Jiang Miao discovered many hidden problems on this computer through the identification panel. Although there were no major problems with the software on the computer on the surface, there were 387 hidden deep instructions hidden in the computer's CPU.

These hidden deep instructions cannot be hidden at all in the information displayed on the identification panel.

The effect of these 387 deep instructions is to regularly collect experimental data and then burn the data into a "scrap circuit" that is part of the storage chip.

As long as the computer uses WLAN, Bluetooth transmission, USB interface, and Internet access, the corresponding deep instructions will be activated and start sending the data stored in the storage chip through various means.

It's simply pervasive.

These instructions cannot be modified by software, because they are physical settings that exist when the chip leaves the factory. Unless the circuit of that part of the chip is destroyed, these deep instructions can be erased. Or some people think that Jiang Miao is worrying too much, and the equipment supplier will not steal the experimental information of Hailufeng Company.

But the premise of not stealing information is only limited to the currently unknown Hailufeng Company. Once the Hailufeng Company develops in the future and threatens the interests of Western forces, they will not let go of this means of stealing secrets.

Jiang Miao looked at the information recorded on the identification panel, thinking about how to solve these hidden dangers.

If there were completely domestically produced precision instruments, he wouldn't have to worry so much. It's a pity that the domestic precision instrument industry is not very strong.

Especially things like chips, which are basically imported. Even for so-called domestically produced precision instruments, the chips and core components used are most likely manufactured by Western companies.

After thinking about it for more than ten minutes, Jiang Miao's eyes suddenly became fierce.

He came to a computer that was equipped with an electron microscope, skillfully opened the case, and removed the motherboard containing the CPU chip.

Then he unfolded the identification panel and looked at the 3D model of the chip. As expected, in order to facilitate hiding, the circuits storing deep instructions were concentrated in a "discarded circuit" in the corner of the chip.

Unfortunately, the chip has been packaged. If he wants to destroy that part of the circuit now, he must remove the epoxy resin layer of the package, which may affect other functions of the chip. After all, he is not a professional chip repair person.

But this doesn't mean he has no solution.

A large pile of tools and materials were taken from the tool room inside the laboratory.

First use aluminum foil and glue to wrap all the parts that do not need to be destroyed, and then Jiang Miao took the motherboard to the seed physical mutagenesis room.

Turning on one of the high-power ultraviolet irradiators, he skillfully operated the software of the accompanying computer to unlock some functions that were disabled by the system.

Place the motherboard on the irradiation area of ​​the UV irradiator, fix it in the designated position, and then press the start button.

A positioned purple light shines on the chip, and the center point of the light is the only place that is not wrapped with aluminum foil.

After the calibration was completed, Jiang Miao pressed the start button without hesitation.

An invisible ultraviolet light penetrated the epoxy resin.

In fact, the epoxy resin used to encapsulate the chip has a certain anti-UV effect, but unfortunately it encountered Jiang Miao, an opponent with a cheat.

The resistance of anything to ultraviolet rays is often not comprehensive, that is to say, there are some specific ultraviolet frequency bands that can avoid this resistance.

Jiang Miao selected a frequency band that is most easily able to penetrate this type of epoxy resin, so the encapsulating epoxy resin cannot block the ultraviolet radiation of this specific frequency band at all.

Soon the ultraviolet rays penetrated the epoxy resin and penetrated into the core chip circuit layer.

High-power ultraviolet rays continuously shine on the chip's nanocircuits, beating with every second.

Jiang Miao could see through the identification panel that the circuit was aging and breaking down little by little.

It only took about eight minutes for Jiang Miao to press the pause button, because the "scrap circuit" on the CPU chip was really scrapped.

Reinstall the motherboard.

After starting the computer, there was no abnormality in the system's surface functions.

Obviously, those deep instructions are equivalent to America's shadow cabinet. Although they are real, if they disappear, it will not affect the normal functioning of the system.

Since it does not affect the use of normal functions, Jiang Miao will naturally not let go of the deep instruction circuits on other supporting computers.

It took more than five hours to dismantle the CPU chips and motherboards of 43 supporting computers and dispose of them harmlessly.

It is estimated that the equipment manufacturers did not expect that someone would use this method to "scrap" their deepest instruction circuits hidden in the deepest part.

Without these deep command circuits, the supporting programs hidden in the software and hardware naturally cannot be activated.

After all, the deep command circuit is equivalent to the brain. Now that it is brain dead, those supporting programs are equivalent to a vegetative state.

However, there are still some hidden dangers. That is, forces familiar with these hidden programs can reactivate these hidden backdoors by implanting Trojans.

Fortunately, Jiang Miao has a solution, which is to destroy these hidden programs through secondary programming.

If Jiang Miao were asked to program a useful program, it would probably be very difficult, after all, he is not a professional programmer.

But if he were allowed to sabotage and paralyze part of the program, it would be too easy.

You just need to open the underlying code of these programs, and then insert some garbled code into the part of the program that needs to be paralyzed, and you can turn these programs into a bunch of dead code.

Therefore, he paralyzed all the corresponding programs of the computers' Bluetooth connections, infrared transmissions, wireless networks, wired networks, and USB interfaces.

These supporting computers are physically disconnected from the Internet.

Even if someone plugs a data cable into the interface, no data can be read unless the computer's storage chip and motherboard are stolen.

(End of this chapter)