Chapter 331 Preliminary Preparations

Chapter 331 Preliminary Preparations

"Did you design this thing?"

Zhao Riyang looked up at Chen Jianye with a questioning look on his face.

"The next generation is to be feared, the next generation is to be feared."

Li Jisheng murmured to himself, looking shocked.

"Boy, no wonder Director Mo asked us to cooperate with you. What the hell is in your head?"

Zhao Hangxing was also amazed.

The three of them were amazed. The clamp designed by Chen Jianye broke through their inherent cognition.

It's amazing that locksmith work can be done this way.

"Seniors, I have already applied to Director Mo for the warehouse to be opened, and for three days of work for you three."

"Next, let's study the materials we need and the direction to start. We'll start tomorrow. Is that ok with you?"

Chen Jianye and the others digested the contents of the clamp and asked.

"I have no opinion."

"can."

"I think we can make this in two days. Can we bring an apprentice to work with us?"

The three of them said.

Zhao Hangxing even suggested that he want his apprentice to participate.

They are all quite old and their skills are high, but they are not suitable for a protracted battle.

It is no problem to work for a morning, but working for two or three days in a row is not only painful, but I am also worried that my body will not be able to take it and my efficiency will be affected.

It’s different for disciples.

He is strong and healthy and can concentrate on his work for two or three days.

Moreover, bringing in apprentices is also a form of training for the younger generation.

"Okay, I will report the progress of the work to Director Mo at the party later, and by the way, I will suggest that the three of you choose to bring an apprentice to participate."

"It is also a tradition of our steel mill to mentor new employees, ensuring the continuous inheritance of technical skills. I believe Director Mo will be happy to see this happen."

Chen Jianye nodded.

After finalizing the personnel composition, the five people began to discuss the composition of the clamp.

For example, in order to improve stability, an alloy frame should be used under the clamp, like a dining table.

Hu Weizhong suggested that since the clamp has four legs, it would be better to add four wheels to it. This would save effort in moving the clamp and facilitate adjusting the position of the clamp later.

For example, when the production line position or workstation adjustment is required, the fixture with wheels can be pushed and moved.

A clamp without wheels is just a lump of iron that requires several adult men to lift, and there are certain safety risks.

Hu Weizhong's proposal was affirmed by the four people.

Chen Jianye added wheels to the clamp on the white paper and suggested that the clamp should be designed to rotate.

This is also for the convenience of subsequent work.

Designing a rotating fixture is not complicated. Just add a circle of discs and use steel balls as bearings.

The four agreed.

The base of the fixture is made of a piece of metal plate, with the edges and corners polished and screw holes drilled.

The most basic cylinder can be selected.

Several people had a disagreement on the choice of materials for the gripper.

Zhao Riyang and Li Jisheng proposed using resin materials so as not to press on the parts and cause surface deformation defects.

Hu Weizhong and Zhao Hangxing proposed using stainless steel to make the grippers, because the resin would wear out and be detrimental to long-term production stability.

As for the deformation of parts caused by clamping, the two top fitters and mold makers did not think it was a problem.

As long as the tolerance gap between the jaws and the parts is well controlled when the jaws are clamped, no deformation will occur.

The most typical one is the pressing technology.

The rolling mill's process can press out a large square piece of metal with a thickness of 3mm.

This proves that pressing metal against metal does not necessarily cause deformation of the metal surface.

It all depends on the modulation technique.

"The material for the receiving parts is a large piece of resin, and the gripper is made of steel. We will make a set first, and then verify the feasibility through actual production results."

Chen Jianye made the final decision.

As the initiator of the project, he has the greatest power.

Hu Weizhong and the others stopped arguing.

The team is obviously led by Chen Jianye. He doesn't speak, so everyone can discuss normally.

He has made the final decision, so you have to listen to him.

Because the work was not successful in the end, Chen Jianye had to bear the responsibility.

After the success, everyone shared the credit. Of course, Chen Jianye deserved the most credit.

After the materials were finalized, Zhao Riyang and the other two went back and called their apprentices over.

Then they went to the warehouse together.

Chen Jianye explained the situation to the warehouse manager. After the warehouse staff asked Director Mo for instructions, they allowed Chen Jianye and his companions to enter the warehouse.

Various materials for making the clamps were taken out from the warehouse.

For example, wheels, angle steels, bearings, steel plates, as well as resins, cylinders, air pipes, relays, buttons, wires, etc.

The workshop warehouse has a very rich reserve of materials.

By the time a few people used a cart to pull the materials out, it was already around four in the afternoon.

"There is another question, where are we going to work?"

"Mr. Hu, is there any space in the workshop for us to operate?"

"We also need electricity and gas, otherwise we can't work."

Chen Jianye encountered another difficult problem and asked Hu Weizhong.

He also discovered that problems always occurred while he was working. Fortunately, the people around him were all technical experts in the workshop and could solve any problems on the spot.

"Yes, there is a special place in the workshop for us to tackle difficult problems."

"Everyone knows it."

Hu Weizhong laughed.

Several people pulled a cart of materials and came to a large house in the workshop.

This is a place in the workshop specifically used for training, guidance and experiments.

"There is actually such a nice place in the workshop. This is my first time here."

Chen Jianye entered the room, looked around and exclaimed.

"Haha, our steel mill is a large unit, so we definitely have everything we need."

Zhao Riyang said with a smile.

After the materials were pulled over, several apprentices placed the materials on the ground.

Chen Jianye glanced at the time. It was already 4:20 in the afternoon.

"Everyone, I have to go upstairs for a meeting. You can rest for a while."

"We will gather here early tomorrow morning. I will bring two sets of unprocessed and processed parts here in advance."

"If you have time, please think about our work priorities tomorrow. I hope to have the framework of the fixture completed before the end of the get off work tomorrow."

Chen Jianye said loudly.

"It will be fine tomorrow."

“There’s still a little time left to get the wheels on the jig feet.”

"It only takes a little over half an hour to make the fixture base."

"No, we haven't decided how big to make the clamp yet."

Hu Weizhong and Zhao Riyang started a discussion.

Seeing that the situation was good, Chen Jianye left with peace of mind.

At the party, Chen Jianye expressed his support to Director Mo in front of many leaders, and Director Mo naturally agreed.

Several section chiefs also said that if there was any need, they could be contacted.

Chen Jianye took out the list of materials he had taken out from the warehouse and gave it to Director Mo for signature.

His work was done.

After get off work, Chen Jianye went to the workplace to take a look.

Hu Weizhong, Zhao Riyang, Li Jisheng and Zhao Hangxing have not left yet.

"Mr. Hu, why haven't you gone home yet?"

Chen Jianye entered the house and asked.

"We all have nothing to do at home, so let's study it further."

Hu Weizhong said casually.

"Yes, my family only has my wife and two grandchildren. With my wife taking care of the grandchildren, it doesn't matter whether I go back or not."

Li Jisheng said with a smile.

"Comrade Jianye, please go back quickly. You still have to accompany your wife. Don't worry about us."

Zhao Hangxing urged.

"Everyone go home."

"Let's talk about it tomorrow. There's no need to rush."

Chen Jianye was very touched.

People these days really work overtime voluntarily.

However, Chen Jianye was not happy to let them work overtime.

Staying at home is always more comfortable than staying at work.